DESCRIPTION OF GOODS
Longitudinal and cross feeds are effected by ball leadscrews. Driven by servo motors.
Either vertical or horizontal 4-station or 6-station tool post or gang tools can be selected. The post is located on precision contrite gears with a high repeated positioning accuracy.
Both chuck and tailstock are supplied with hydraulic or manual type.
The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
The spindle bore size is Ø 80mm. The spindle system is high in the rigidity and accuracy.
|Maximum turned length||500 mm||500/750/1000mm||500/750/1000mm|
|Max. turning length||460mm||450/700/950 mm||450/700/950 mm|
|Spindle nose||D4 or A2-5||C5||C6|
|Spindle bore||Ø38 or Ø43mm||Ø40mm||Ø52mm|
|Cone hole diameter and taper of spindle hole||MT.No.5
or 40° Taper
|Steps of spindle speed(Manual)||Variable|
|Range of spindle speed||200~3500r/min||200~2800r/min|
|Rapid feed for Axis Z||10m/min|
|Rapid feed for Axis X||8 m/min|
|Max. travel of Axis Z||460mm(18")||490/740/990 mm|
|Max. travel of Axis X||165/260mm
|Tool post stations||Gang tool post or power tool post||4-ways or 6-ways or gang tools|
|Tool cross section||16×16 mm||20×20 mm|
|Taper of bore||MT.No.3||MT.No.4|
|Max. Traverse||130 mm||120 mm|
|X/Z motor torque||3.6/4.7Nm||3.6/4.7Nm|
|Power of main motor||3KW(4HP)||3.7KW(5HP)||3.7KW/5.5KW|
|Power of cooling pump||75W|