DESCRIPTION OF GOODS
THE CNC system is GSK980TDC, With both horizontal and vertical structure. With 8.4-inch color LCD,
can control the five feed axis (including Cs axis), 2 analog spindle, the minimum unit of 0.1μm. and also
can be make in Chinese, English, Spanish, Russian, Portuguese and other languages for different country customers.
Xaxis and Z axis are controlled by the semi-closed loop. It is drived by the servo motor to drive the precision
ball leadscrew to achieve fast shifting and rapid feeding.Ballscrew is C3 degree with high precision.
All electric part all passed CE approve.
The machine with 4 position too post which brand is very famour in China,high positioning accuracy,
high strength, good shock resistance.
Before machine leave factory,we have to pass stric inspection.every machine all test the positioning
accuracy and repeatability accuracy of X AXIS and Z AXIS by laser interferometer to ensure machine's precision.
Machine adopts Centralized lubrication of famous brand "HERG"from Japan.headstock lubrication
adopts Taiwan Po Teng cycloid pump forced circulation lubrication
The bed adopts Resin sand molding, high-quality cast iron casting, width of bed 312mm, guide way
fired depth is up to 3mm, improving wear resistance and stability
Spindle structure using front and rear ends of the typical structure of two points of support, with high rigidity.
Main drive for the second gear stepless frequency control, speed range of 21 ~ 1600r / min
The design of headstock fully consider the cooling measures and shock absorption mechanism, making
headstock with low noise, high precision transmission characteristics.
|STANDARD ACCESSORIES||OPTIONAL ACCESSORIES|
|GSK 980TDC CNC controller||FANUC or SIEMENS CNC controller|
|3- jaw manual chuck diameter 200mm with flange||Spring fastener|
|center MS GB9204.1-88||6 positions tool post `hydraulic tailstock|
|Electric Lubrication||hydraulic chuck|
|4 Positions tool post|
|double ended wrench, hexagonal wrench, square box wrench,hook spanners.
|hand push oil gun|
|Max .Swing over bed||360mm||400mm|
|Max.swing over carriage||200||240|
|Max.length of work piece||750/1000mm|
|width of bed||312mm|
|section of turning tool||20x20mm|
|Thru-hole of spindle||52mm|
|Spindle speeds (stepless)||independent spindle 100-1600rpm|
|Tailstock center sleeve travel||90mm|
|Tailstock center sleeve taper||MT4|
|X/Z rapid traverse||3/6m/min|
|(L*W*H mm) for 750|
|(L*W*H mm) for 1000|
|Weight(kg) for 750||1300kg||1600kg|
|Weight(kg) for 1000||1400kg||1700kg|