Air Compressor

Air Compressor

  1. Cooling the inner surface of the preform without using the high pressure compressed air , unlike most post-mold cooling systems which only cool the outer surface.
  2. Optimized cycle utilization - being mounted on the moving platen , the cooling system remains active within 85% of the overall cycle-time.
  3. Capacity of PET injection molding system is from 280 to 500 tonnes ( 2800KN to 5000KN ) , and it is available for the preform mould maximum with 96 cavities.

 

 

Screw Compressor:

Model

Flow(m³/min)

Dimension L*W*H(m)

0.7mpa

0.8mpa

1.0mpa

1.2mpa

15kw

2.5

2.3

2.1

1.8

1.45x1.35x1.45

18.5kw

3.1

2.9

2.6

2.2

1.60x1.35x1.45

22kw

3.7

3.5

3.1

2.9

1.60x1.35x1.75

30kw

5.3

5.0

4.6

3.9

1.60x1.35x1.75

37kw

6.7

6.2

5.7

5.0

1.80x1.55x1.85

45kw

7.2

7.0

6.2

5.7

1.80x1.55x1.85

55kw

10.0

9.1

8.2

7.4

2.10x1.80x1.85

 

 

High Pressure Air Compressor:

Model

Flow(m³)

Power(kw)

Pressure (Mpa)

Air tank(m³)

Dimension L*W*H(m)

0.63/30

0.63

7.5

3.0

0.19

1.6x0.7x1.35

1.0/30

1.0

11

3.0

0.15

1.9x0.9x1.3

1.2/30

1.2

15

3.0

0.15

1.9x0.9x1.3

1.6/30-40

1.6

18.5

3.0/4.0

NO

1.25x1.05x1.7

2.0/30-40

2.0

11x2

3.0/4.0

NO

2.0x1.65x1.35

2.4/30

2.4

15x2

3.0

NO

2.0x1.65x1.35

3.2/30-40

3.2

18.5x2

3.0/4.0

NO

2.7x1.1x2.0

4.8/30-40

4.8

18.5x3

3.0/4.0

NO

4.0x1.05x1.8

6.0/30-40

6.0

22x3

3.0/4.0

NO

6.5x1.25x1.65

6.4/30-40

6.4

18.5x4

3.0/4.0

NO

6.3x1.2x2.0

 

Low Pressure Air Compressor:

Model

Flow(m³)

Power(kw)

Pressure (Mpa)

Air tank(m³)

Dimension L*W*H(m)

1.0/10

1.0

7.5

1.0

0.19

1.8x0.85x0.65

1.6/10

1.6

11

1.0

0.30

2.0x1.05x1.9

2.0/10-12

2.0

15

1.0/1.2

0.36

2.0x1.05x1.9

3.0/10-12

3.0

22

1.0/1.2

0.45

2.1x1.1x1.9

4.0/10-12

4.0

15x2

1.0/1.2

0.48

2.3x2.1x1.9

WhatsApp Online Chat !